SolarCleano / T1
SolarCleano T1, the productivity multiplier on ground parks
The T1 does not clean: it carries. It moves the F1, M1 or L1 from one row of a PV park to the next and tilts its platform, up to 34°, to the angle of the structure for safe loading and unloading. One operator controls robot and transporter from the same position.
Why it pays
No more dead time between rows
On a ground park a large part of an operator's day is not cleaning: it is dismantling the robot at the end of a row, carrying it between structures, repositioning and reassembling it. The T1 removes this unproductive time.
The gain in daily capacity depends on the park's geometry: row length, distance between structures, access between bays. A joint F1 plus T1, or L1 plus T1, demo measures the real gain on your case.
Specifications
Manufacturer data
- CompatibilityF1, M1 and L1, operated with the same remote control
- Operatorone, for both cleaning robot and transporter
- Platformautomatic tilt up to 34° for loading on steep structures; several heights available for different structures
- Trackshigh-grip, for uneven ground, dirt, gravel under the modules and side slopes
- Supplied with4 batteries, charger and remote control
Who it is for
An add-on to a robot, not a stand-alone purchase
- Service companies working mainly on ground parks, with established volumes.
- O&M companies with their own parks above 10 MW, where 20 or 30 minutes saved per row add up to whole days per cycle.
- F1 or L1 operators wanting to offer tighter turnaround on large parks.
- Owners bringing park cleaning in house without relying on outside crews in critical seasonal windows.
If the work is mostly industrial roofs, residential or commercial, the T1 is not needed: the robot enters and leaves the plant on its own, on the flat. To see whether the T1 makes sense, we calculate the non-cleaning time on a typical job, on site at your plants.
T1 assessment on your parks.
Request an assessment